LC Technology AC/DC 1 Channel ESP-12F Dev Board
Relay
Model reference: LC-Relay-ESP12-1R-MV
Available from:
Aliexpress.com
Banggood.com
Manufacturer:
Chinalctech.com
| GPIO # | Component |
|---|---|
| GPIO00 | User |
| GPIO01 | User |
| GPIO02 | LedLink |
| GPIO03 | User |
| GPIO04 | User |
| GPIO05 | Relay1 |
| GPIO09 | User |
| GPIO10 | User |
| GPIO12 | User |
| GPIO13 | User |
| GPIO14 | User |
| GPIO15 | User |
| GPIO16 | Led2i |
| FLAG | User |
Template
{"NAME":"LC-ESP12-1R-MV","GPIO":[255,255,157,255,255,21,255,255,255,255,255,255,57],"FLAG":15,"BASE":18}
This dev board can be powered by AC 90V-250V，DC 7-12V or DC 5V via microUSB. Choose only one of the three!
Led2i is connected to GPIO15. You can unassign it or control it using “LedPower2” command.
Flashing
WARNING: DO NOT IN ANY CIRCUMSTANCE OPERATE THE DEVICE WHILE CONNECTED TO AC POWER
Flash using any of the provided TX/RX headers and GND. Do not connect VCC from the USB-to-serial adapter but power the module using micro USB.
