Garage Door Controller Switch
Garage Door Controller

Available from:

GPIO #Component
GPIO00 None
GPIO01 Tuya Tx
GPIO02 None
GPIO03 Tuya Rx
GPIO04 None
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 None
GPIO14 None
GPIO15 None
GPIO16 None
{"NAME":"Garage Opener","GPIO":[0,107,0,108,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":54}

Generic garage door controller, TuyaMCU relay with magnetic reed switch

“SwitchMode”:[4,1,0,0,0,0,0,0] could use inverted also.

To have POWER topic seperated to split out reed switch from relay results run the following commands (from https://groups.google.com/g/sonoffusers/c/wIjX2sWLJMU/m/CzXrzRNvCAAJ). Config might need to be adjusted to have LED work correctly. Don’t forget to adjust topics in the new rule to your configuration. https://tasmota.github.io/docs/Rules/#garage-door-opener has more discussion on required rules.

Backlog TuyaMCU 2, 101; TuyaMCU 11, 1; TuyaMCU 0, 7;
Switchmode1 4
Switchmode2 1
Rule1 on switch2#state=1 do publish2 stat/SW_Garage/POWER2 Open endon on switch2#state=0 do publish2 stat/SW_Garage/POWER2 Closed endon
Rule1 1

fnId=2 is set for dpId=101

fnId=11 is set for dpId=1

fnId=0 is set for dpId=7