Kisslink SP200 Plug
Kisslink SP200

Available from:

Flashed with:

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 Led1i
GPIO05 Led2i
GPIO09 None
GPIO10 None
GPIO12 Relay1
GPIO13 Button1
GPIO14 None
GPIO15 None
GPIO16 None
FLAG Analog


{"NAME":"Kisslink SP200","GPIO":[0,0,0,0,56,57,0,0,21,17,0,0,0],"FLAG":1,"BASE":18}

Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.

Configured as most plug templates: flashing blue if not connected. No LED if connected. Red LED when on.