Logo
Lenovo SE-341A Plug
AU
Model reference: ZG38C02793
Lenovo SE-341A

Available from:
Jbhifi.com.au






Flashed with:
Serial port

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 Button1
GPIO05 Relay1
GPIO09 None
GPIO10 None
GPIO12 LedLinki
GPIO13 None
GPIO14 Led1i
GPIO15 None
GPIO16 None
FLAG None
Template
{"NAME":"Lenovo SE-341A","GPIO":[0,0,0,0,17,21,0,0,158,0,56,0,0],"FLAG":0,"BASE":18}

Device does not work with tuya-convert, as it never enters the required pairing mode (will only slow flash and output a wifi signal). To open the device, it is held in place with clips on the side & top/bottom (small screwdriver or opening tool highly recommended). Ground, 3.3v, Rx/Tx are all labeled.