Moes Tuya Remote Control IR Controller (UFO-R6)
Available from:
Aliexpress.com
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | User |
| GPIO01 | User |
| GPIO02 | User |
| GPIO03 | User |
| GPIO04 | User |
| GPIO05 | IRrecv |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | Button1 |
| GPIO14 | IRsend |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Moes IR Controller","GPIO":[255,255,255,255,255,51,0,0,0,17,8,0,0],"FLAG":0,"BASE":62}
Use code
BLAKADDER when buying from moeshouse.com store for a 20% discount.
This device uses
WB3S
module which needs to be replaced with
ESP8685-WROOM-01, ESP-12, ESP-C3-12F, ESP-12H, ESPC2-12 or ESP8684-WROOM-01C. Read more about module replacement in a detailed guide.
Since early 2022 Moes IR Controller is sent with WB3S chip, which is not compatible with Tasmota. But you can replace the chip with a ESP12 (or similar). After replacing the chip, you must solder/close pins GPIO15 and GND together