01space 5x5 WS2812B Development Board (ESP32-C3-RGB)
Available from:
Banggood.com
Manufacturer:
Github.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | I2C SDA 1 |
| GPIO01 | I2C SCL 1 |
| GPIO02 | User |
| GPIO03 | User |
| GPIO04 | User |
| GPIO05 | User |
| GPIO06 | User |
| GPIO07 | User |
| GPIO08 | WS2812 1 |
| GPIO09 | Button 1 |
| GPIO010 | LedLink |
| GPIO011 | None |
| GPIO012 | None |
| GPIO013 | None |
| GPIO014 | None |
| GPIO015 | None |
| GPIO016 | None |
| GPIO017 | None |
| GPIO018 | User |
| GPIO019 | User |
| GPIO020 | User |
| GPIO021 | User |
Configuration for ESP32-C3
{"NAME":"01Space_ESP32-C3-RGB","GPIO":[640,608,1,1,1,1,1,1,1376,32,544,0,0,0,0,0,0,0,1,1,1,1],"FLAG":0,"BASE":1,"CMND":"Pixels 25"}Auto-configuration
After flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select your device from the drop-down and click Apply Configuration.The device will restart and will be automagically configured.
This device uses the built in serial-to-USB chip. It will not have serial output unless you install a tasmota32c3 build with CDC enabled.