2nice Plug (SP111)
Available from:
Amazon.de
Amazon.de
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led1i |
| GPIO01 | None |
| GPIO02 | Led2i |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | Button1 |
| GPIO14 | None |
| GPIO15 | Relay1 |
| GPIO16 | None |
| FLAG | Temperature |
Configuration (old format, will be converted to new template when applied)
{"NAME":"2NICE SP111","GPIO":[56,0,57,0,0,0,0,0,0,17,0,21,0],"FLAG":2,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-01-10).
Tuya-Convert might not be possible for this device since the template was added (2020-01-10).
The 2NICE SP111 is looking quite identical to the Gosund SP111 types. The manufacturer mentioned on the package is ‘Shenzhen Gosund Technologie Co. Ltd.’ Major difference is that the 2NICE SP111 device does not support power monitoring, but it supports the analog temperature sensor instead. So the template is based on the Gosund SP111 templates with GPIO5, GPIO12 and GPIO14 set to ‘None’ and with the FLAG set to 2”