CD303 3 Gang Touch Switch (CD303)
Available from:
Ebay.com.au
Alibaba.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led3 |
| GPIO01 | Led2i |
| GPIO02 | User |
| GPIO03 | Button3 |
| GPIO04 | Relay3 |
| GPIO05 | Button2 |
| GPIO09 | User |
| GPIO10 | User |
| GPIO12 | Button1 |
| GPIO13 | Relay1 |
| GPIO14 | User |
| GPIO15 | Relay2 |
| GPIO16 | Led1 |
| FLAG | User |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Touch Switch 3","GPIO":[54,57,255,19,23,18,255,255,17,21,255,22,52],"FLAG":15,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-02-18).
Tuya-Convert might not be possible for this device since the template was added (2020-02-18).
Not all LEDs work as switch status in Tasmota, but they are useable as individual outputs:
- GPIO0 is the wifi status led.
- GPIO16 is button 1 led (nearest wifi status)
- GPIO1 is button2 led
- GPIO14 is button3 led