DD001-MINI(G)-IR-V08 LED Controller
Available from:
Aliexpress.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM1 |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM2 |
| GPIO13 | None |
| GPIO14 | PWM3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"WIFI-RGB","GPIO":[0,0,0,0,37,0,0,0,38,0,39,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-02-07).
Tuya-Convert might not be possible for this device since the template was added (2020-02-07).
To get this device into flashing mode you have to turn the power on and off 5 times, then the RGB strip begins to blink.
