Logo
DT-Light ESP8285 Lighting Module
Model reference: DMP-L1
DT-Light ESP8285 Lighting

Available from:
Aliexpress.com
Amazon.com
Banggood.com


Manufacturer:
Github.com

Install method:
USB to Serial

GPIO #Component
GPIO00 User
GPIO01 User
GPIO02 None
GPIO03 User
GPIO04 User
GPIO05 User
GPIO09 None
GPIO10 None
GPIO12 User
GPIO13 User
GPIO14 User
GPIO15 User
GPIO16 User
GPIO17 User
Configuration
{"NAME":"DMP-L1","GPIO":[1,1,0,1,1,1,0,0,1,1,1,1,1,1],"FLAG":0,"BASE":18}
{"NAME":"DMP-L1 Light","GPIO":[1,1,0,1,419,418,0,0,416,420,417,1,1,1],"FLAG":0,"BASE":18}

This module is designed for bulbs so the pinout labeling shows colors. Module is (almost) pin compatible with TYWE2L, WR2L, WB2L, WBR2L

It can still be used for any application, just like any other module. It has almost all of the GPIOs broken out (excluding GPIO2) and that includes the A0 analog GPIO.

Pinout

Header are too small for standard Dupont cables but breadboard wires will fit.

Pinout:

  • GPIO0 - D0
  • GPIO1 - TX0
  • GPIO3 - RX0
  • GPIO4 - W
  • GPIO5 - B
  • GPIO12 - R
  • GPIO13 - Y
  • GPIO14 - G
  • GPIO15 - IrDA
  • GPIO16 - D16
  • GPIO17 - ADC