DS-101 2 Gang Switch (DS-101)
DS-101 2 Gang

Available from:

Install method:
USB to Serial

GPIO #Component
GPIO00 LedLinki
GPIO01 Led 2
GPIO02 None
GPIO03 Button 1
GPIO04 Relay 2
GPIO05 Button 2
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 Relay 1
GPIO14 Led 1
GPIO15 None
GPIO16 None
GPIO17 None
{"NAME":"Smart Life Switch","GPIO":[576,289,0,32,225,33,0,0,0,224,288,0,0,0],"FLAG":0,"BASE":18}

In order to flash, GIO0 must be always connected to ground, and on the MCU chip (as I was not able to find out what chip it is) I disconnected both the Rx and the Tx legs.