Model reference: DS-101
Available from:
Amazon.co.uk
Aliexpress.com
Flashed with:
Serial port
| GPIO # | Component |
|---|---|
| GPIO00 | LedLinki |
| GPIO01 | Led3i |
| GPIO02 | None |
| GPIO03 | Button2 |
| GPIO04 | Relay3 |
| GPIO05 | Button3 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Button1 |
| GPIO13 | Relay2 |
| GPIO14 | Led2i |
| GPIO15 | Relay1 |
| GPIO16 | Led1i |
| ADC0 | None |
Template for Tasmota v9.1+
{"NAME":"DS-101 3 gang","GPIO":[576,322,0,33,226,34,0,0,32,225,321,224,320,0],"FLAG":0,"BASE":18}Open it up, disconnect it from the switching board from the bottom(just pull it off), there you will find the main proccessor and (for me unmarked) tuya mcu 2ways of flashing:
- disconnect the TX pin (2nd from top on the right (dot is up left))
- pulling rst LOW (4th from top on the left (dot is up left))
