DS-102 3 Gang Switch
DS-102 3 Gang
GPIO #Component
GPIO00 LedLinki
GPIO01 Led3i
GPIO02 None
GPIO03 Button2
GPIO04 Relay2
GPIO05 Button3
GPIO09 None
GPIO10 None
GPIO12 Button1
GPIO13 Relay1
GPIO14 Led2i
GPIO15 Relay3
GPIO16 Led1i
Configuration (old format, will be converted to new template when applied)
{"NAME":"DS-102 3 Gang","GPIO":[158,58,0,18,22,19,0,0,17,21,57,23,56],"FLAG":0,"BASE":18}

This device now comes with a Wi-Fi module incompatible with Tasmota


As of May 2022 these switches use a WB3S chip (BK7231T) and are no longer compatible.

The three blue LEDs are configured to toggle with the switches. The additional red led behind the left button is configured as link indicator.

If you prefer the blue LEDs to be illuminated when power is turned OFF, i.e. when the room is dark, replace “Led1i”/”Led2i”/”Led3i” by “Led1”/”Led2”/”Led3”.