ESP32-C3-C05 ESP32-C3 4Mb Module (DT-ESP-C05)
Configuration for ESP32-C3
Module 1
This module can replace modules such as: CB2L, DT-BL200, TYWE2L, WB2L, WBR2L, WR2L
Flashing
Flash using Tasmota Web Installer and select Tasmota ESP32-C3 option.
For esptool.py download f.e. tasmota32c3.factory.bin and run esptool.py write_flash 0x0 tasmota32c3.factory.bin
To put ESP32-C3 in flash mode GPIO8 needs to be pulled high and GPIO9 pulled low. Some devices have that by default.
