{"NAME":"LC-Relay-ESP12-1R-MV","GPIO":[1,1,544,1,1,224,1,1,1,1,1,1,321,1],"FLAG":0,"BASE":18}

This dev board can be powered by AC 90V-250V，DC 7-12V or DC 5V via microUSB. Choose only one of the three!

Led2i is connected to GPIO15. You can unassign it or control it using “LedPower2” command.

Flashing

WARNING: DO NOT IN ANY CIRCUMSTANCE OPERATE THE DEVICE WHILE CONNECTED TO AC POWER

Flash using any of the provided TX/RX headers and GND. Do not connect VCC from the USB-to-serial adapter but power the module using micro USB.