Espressif ESP32-S3-DevKitC-1-N16R8V Development Board (ESP32-S3-DevKitC-1-N16R8V)
![Espressif ESP32-S3-DevKitC-1-N16R8V](/assets/device_images/espressif_ESP32-S3-DevKitC-1.webp)
Available from:
Www2.mouser.com
Manufacturer:
Docs.espressif.com
Install method:
USB to Serial
GPIO # | Component |
---|---|
GPIO00 | User |
GPIO01 | User |
GPIO02 | User |
GPIO03 | User |
GPIO04 | User |
GPIO05 | User |
GPIO06 | User |
GPIO07 | User |
GPIO08 | User |
GPIO09 | User |
GPIO10 | User |
GPIO11 | User |
GPIO12 | User |
GPIO13 | User |
GPIO14 | User |
GPIO15 | User |
GPIO16 | User |
GPIO17 | User |
GPIO18 | User |
GPIO19 | User |
GPIO20 | User |
GPIO21 | User |
GPIO33 | User |
GPIO34 | User |
GPIO35 | None |
GPIO36 | None |
GPIO37 | None |
GPIO38 | WS2812 1 |
GPIO39 | User |
GPIO40 | User |
GPIO41 | User |
GPIO42 | User |
GPIO43 | User |
GPIO44 | User |
GPIO45 | User |
GPIO46 | User |
GPIO47 | User |
GPIO48 | User |
Configuration for ESP32-S3
{"NAME":"ESP32-S3-DevKitC-1-N16R8V","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,0,0,1376,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":1}
Auto-configuration
After flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select your device from the drop-down and click Apply Configuration.The device will restart and will be automagically configured.
Flash: 16 MB Octal SPI (OT) PSRAM: 8 MB Octal SPI (OT)
For boards with Octal SPI flash/PSRAM memory embedded, the pins GPIO35, GPIO36 and GPIO37 are used for the internal communication between ESP32-S3 and SPI flash/PSRAM memory, thus not available for external use.
Used tasmota32s3-opi_opi.factory.bin
and Tasmota Web Installer to flash the device with built in USB-C serial adapter. Download