Logo
IOT4 Environmental Sensor (IOT4SH01BME680)
EU
IOT4 Environmental

Available from:
Iot4.eu





Manufacturer:
Iot4.eu

Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 None
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 I2C SDA 1
GPIO13 None
GPIO14 I2C SCL 1
GPIO15 None
GPIO16 None
GPIO17 None
Configuration
{"NAME":"IOT4SH01BME680","GPIO":[0,0,0,0,0,0,0,0,640,0,608,0,0,0],"FLAG":0,"BASE":18}

Open device (2 screws). On the PCB there is a header labeled “P1” which exposes connections for VCC, GND, TX and RX. Flash as usual with tamota-sensors.