MXQ LED Nightlight Plug (SP06)
Available from:
Amazon.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Led1 |
| GPIO05 | Switch1n |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay2 |
| GPIO13 | Led2i |
| GPIO14 | Relay1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"MXQ SP06","GPIO":[0,0,0,0,52,82,0,0,22,57,21,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-11-06).
Tuya-Convert might not be possible for this device since the template was added (2020-11-06).
Use the settings to help control the plug with one press and press/hold for night light.
Backlog switchmode1 5; setoption32 8; rule1 on switch1#state=2 do power1 TOGGLE endon on switch1#state=3 do power2 TOGGLE endon; rule 1 1