SA-P202C 16A Power Monitoring Plug (SA-P202C-G(16A))
Available from:
Aliexpress.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button1 |
| GPIO04 | HLW8012 CF |
| GPIO05 | HLWBL CF1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | HLWBL SELi |
| GPIO13 | Led1i |
| GPIO14 | Relay1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Elivco 202C-G","GPIO":[0,0,0,17,133,132,0,0,131,56,21,0,0],"FLAG":0,"BASE":18}
For more accurate energy consumption measurements this device requires power monitoring calibration.
Tuya Convert is not working anymore. I had to solder some wires but it was very easy seeing the pinout in the internet. VCC to 3.3v GND to GND GND to GPIO0 TX to RX RX to TX Run Tasmotizer APP using tasmota.bin file. Done!