SWB2 3AC + 2USB Power Strip
Available from:
Aliexpress.com
Amazon.de
Manufacturer:
Lingan.en.alibaba.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | LedLinki |
| GPIO01 | User |
| GPIO02 | None |
| GPIO03 | User |
| GPIO04 | None |
| GPIO05 | Relay3 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | Button1 |
| GPIO14 | Relay2 |
| GPIO15 | Relay4 |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"SWB2","GPIO":[158,255,0,255,0,23,0,0,21,17,22,24,0],"FLAG":0,"BASE":18}Produced by Lingan, branded under various names (BlitzWolf BW-SHP9). PCB is marked “Lingan swb2-1 REV:v1.1”.
To disassemble remove the rubber feet, unscrew 6 screws (two are hidden behind the sticker), remove backplate and unscrew 6 more screws holding the PCB to the enclosure. Run on ESP8266 based LM1 module. All GPIO’s are broken out and labelled in the corner.