Ai-Thinker ESP32-C3-12F (C3FN4) Development Board (ESP-C3-13-Kit)
Available from:
Aliexpress.com
| GPIO # | Component |
|---|---|
| GPIO00 | User |
| GPIO01 | User |
| GPIO02 | User |
| GPIO03 | PWM 1 |
| GPIO04 | PWM 2 |
| GPIO05 | PWM 3 |
| GPIO06 | User |
| GPIO07 | User |
| GPIO08 | None |
| GPIO09 | Button 1 |
| GPIO010 | User |
| GPIO011 | None |
| GPIO012 | None |
| GPIO013 | None |
| GPIO014 | None |
| GPIO015 | None |
| GPIO016 | None |
| GPIO017 | None |
| GPIO018 | PWM 5 |
| GPIO019 | PWM 4 |
| GPIO020 | User |
| GPIO021 | User |
Configuration for ESP32-C3
{"NAME":"AI Thinker ESP-C3-12F","GPIO":[1,1,1,416,417,418,1,1,0,32,1,0,0,0,0,0,0,0,420,419,1,1],"FLAG":0,"BASE":1}Flashing
Flash using Tasmota Web Installer and select Tasmota ESP32-C3 option.
For esptool.py download f.e. tasmota32c3.factory.bin and run esptool.py write_flash 0x0 tasmota32c3.factory.bin
To put ESP32-C3 in flash mode GPIO8 needs to be pulled high and GPIO9 pulled low. Some devices have that by default.