{"NAME":"KS1","GPIO":[255,71,17,72,17,51,0,0,56,0,8,0,0],"FLAG":1,"BASE":62}

DISCONTINUED

The Pins are:

1. GND
2. GPIO0
3. TX
4. RX
5. 3V3

Screws are cheap and easy to chew up. PH1 screwdriver is recommended.

Usage

In the console observe output when IR command is received.

Example:

00:00:51 RSL: tele/tasmota_4855D2/RESULT = {"Time":"1970-01-01T00:00:51","IrReceived":{"Protocol":"NEC","Bits":32,"Data":"0x000C40BF"}}

You can then send that command to be transmitted by the KS1. See IR Remote Commands

Example:

IRsend {"Protocol":"NEC","Bits":32,"Data":"0x000C40BF"}