Anhaorui 6+6AC 4USB Power Strip (ZN-709)
Available from:
Amazon.com
Install method:
USB to Serial
GPIO # | Component |
---|---|
GPIO00 | Led_i 1 |
GPIO01 | None |
GPIO02 | None |
GPIO03 | Switch 1 |
GPIO04 | Relay 1 |
GPIO05 | Relay 2 |
GPIO09 | None |
GPIO10 | None |
GPIO12 | Relay 5 |
GPIO13 | Relay 6 |
GPIO14 | Relay 4 |
GPIO15 | Relay 3 |
GPIO16 | None |
GPIO17 | None |
Configuration
{"NAME":"Anhaorui ZN-709","GPIO":[320,0,0,160,224,225,0,0,228,229,227,226,0,0],"FLAG":0,"BASE":18,"CMND":"SwitchMode1 5|SO32 10"}
The power-strip has triangular socket screws (Size 27). Wi-Fi module is a TYWE3S (as of October 11, 2021 order).
Rule to control all 6 relays with multi-press and hold to turn all relays off.
Rule1
ON System#Boot DO Var1 0 ENDON
ON Switch1#State=3 DO Backlog0 Power1 0; Power2 0; Power3 0; Power4 0; Power5 0; Power6 0; Var1 0 ENDON
ON Switch1#State=2 DO ADD1 1 ENDON
ON Var1#State==1 DO RuleTimer1 1 ENDON
ON Rules#Timer=1 DO Backlog Var2 %Var1%; Var1 0 ENDON
ON Var2#State==1 DO Power1 TOGGLE ENDON
ON Var2#State==2 DO Power2 TOGGLE ENDON
ON Var2#State==3 DO Power3 TOGGLE ENDON
ON Var2#State==4 DO Power4 TOGGLE ENDON
ON Var2#State==5 DO Power5 TOGGLE ENDON
ON Var2#State==6 DO Power6 TOGGLE ENDON
Enable with Rule1 1
.
Pinout
.