Arilux AL-LC06 LED Controller
Available from:
Banggood.com
Aliexpress.com
| GPIO # | Component |
|---|---|
| GPIO00 | Button1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM2 |
| GPIO13 | PWM3 |
| GPIO14 | PWM1 |
| GPIO15 | PWM5 |
| GPIO16 | PWM4 |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Arilux LC06","GPIO":[17,0,0,0,0,0,0,0,38,39,37,41,40],"FLAG":0,"BASE":18}CW/WW mode
If you use this controller with Cold White / Warm White LED strip (without RGB), use the following template:
{"NAME":"Arilux LC06 in CW/WW mode","GPIO":[17,0,0,0,0,37,0,0,0,0,0,38,0],"FLAG":0,"BASE":18}
XCSOURCE
The XCSOURCE branded version of this controller seems to have a different GPIO pin for the CW channel. The following template (9.1+) fixes the issue:
{"NAME":"Arilux LC06","GPIO":[32,0,0,0,0,419,0,0,417,418,416,420,0,0],"FLAG":0,"BASE":18}
Serial Flashing
Complete guide at Tasmota Docs
If the device is powered via external power-supply, do not connect +3.3V from your USB-UART/programmer, but you do have to connect GND.