Arlec Smart 10W LED Bunker Light (ABL015HA)
Available from:
Bunnings.com.au
Bunnings.co.nz
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | PWM1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"DetaBulkhead","GPIO":[0,0,0,0,0,0,0,0,0,0,37,0,0],"FLAG":0,"BASE":18}This device now comes with a Wi-Fi module incompatible with Tasmota
Device contains a TYWE2S, soldering to the board will permit flashing, easily accessible without any damage to the enclosure using only phillips screws and plastic clips.
Recently Purchased from Bunnings.com.au and device now contains CB2S Module. Will need to replace with ESP-02S then Flash Tasmota