Logo
Arlec Smart 1m CCT LED Strip Light LED Strip (ALD155HA)
AU
Arlec Smart 1m CCT LED Strip Light

Available from:
Bunnings.com.au







Install method:
Replace module

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 IRrecv
GPIO03 None
GPIO04 None
GPIO05 PWM 1
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 PWM 2
GPIO14 None
GPIO15 None
GPIO16 None
GPIO17 None
Configuration
{"NAME":"ALD155HA","GPIO":[0,0,1088,0,0,416,0,0,0,417,0,0,0,0],"FLAG":0,"BASE":18}
This device uses a Tasmota incompatible module which needs to be replaced with an ESP module. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.

Identical to the “Arlec Smart 2m LED Colour Changing Strip Light LED Strip (ALD233HA)” but template is slightly different as are the IR Codes for the rules. IR Codes can be discovered by studying the console output when the IR Remote buttons are pressed.

Following rules gets most of the IR Commands except for Fade, Sleep and Mode.

Rule1 ON IrReceived#Data=0x00FF629D do power off ENDON ON IrReceived#Data=0x00FFA25D do power on ENDONON IrReceived#Data=0x00FF22DD do dimmer + ENDON ON IrReceived#Data=0x00FF6897 do dimmer - ENDON ON IrReceived#Data=0x00FF02FD do CT 500 ENDON ON IrReceived#Data=0x00FFA857 do CT 326 ENDON ON IrReceived#Data=0x00FF9867 do CT 153 ENDON ON IrReceived#Data=0x00FFC23D do CT + ENDON ON IrReceived#Data=0x00FFB04F do CT - ENDON

Activate rule with ‘Rule1 1’