Arlec Smart 20W Movement Activated Security
Light
Model reference: MAL300HA
Available from:
Bunnings.com.au
Flashed with:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Relay1 |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Template
{"NAME":"Arlec MAL300HA","GPIO":[0,0,0,0,21,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.
Relay turns on/off built in movement sensor. Light turns on at first power on.