Logo
Arlec IP44 Weatherproof Outdoor Plug (PC44HA)
AU
Arlec IP44 Weatherproof

Available from:
Bunnings.com.au







Install method:
Replace module

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 HLWBL CF1
GPIO04 Relay 1
GPIO05 HLWBL SEL
GPIO06 Led_i 1
GPIO07 None
GPIO08 None
GPIO09 None
GPIO010 BL0937 CF
GPIO011 None
GPIO012 None
GPIO013 None
GPIO014 None
GPIO015 None
GPIO016 None
GPIO017 None
GPIO018 None
GPIO019 None
GPIO020 Button 1
GPIO021 LedLink
Configuration for ESP32-C3
{"NAME":"Arlec PC44HA","GPIO":[0,0,0,2656,224,2592,320,0,0,0,2720,0,0,0,0,0,0,0,0,0,32,544],"FLAG":0,"BASE":1}
Requires a special ESP32-C3 `tasmota32c3.bin` binary.

This device uses WB2S module which needs to be replaced with WT-01N, ESP-02S or WT32C3-01N module. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.

This device uses WB2S module which needs to be replaced with WT-01N, ESP-02S or WT32C3-01N module. Besides the module, this process will require a soldering tool and moderate soldering skill.

Has been tested with a WT32C3-01N module.