Athom 3-Way Mini Relay Switch Module (RS01C3)
Available from:
Aliexpress.com
Manufacturer:
Athom.tech
Install method:
Tasmota pre-installed
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button 1 |
| GPIO04 | Switch 1 |
| GPIO05 | None |
| GPIO06 | Relay 1 |
| GPIO07 | LedLinki |
| GPIO08 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO18 | None |
| GPIO19 | None |
| GPIO20 | CSE7766 Rx |
| GPIO21 | None |
Configuration for ESP32-C3
{"NAME":"RS01C3-TAS-1","GPIO":[0,0,0,32,160,0,224,576,0,0,0,0,0,0,0,0,0,0,0,0,3104,0],"FLAG":0,"BASE":1}
This device comes with Tasmota already installed!
For more accurate energy consumption measurements this device requires power monitoring calibration.
- ESP32C3 with 4MB flash
- Warning: S1 and S2 are input pins allowing only a contact / switch potential free. You can’t input any voltage, it is dangerous. Source: Support of Athom.