Automate Things IR Bridge IR Controller (AT-IRBR v1.4)
Automate Things IR Bridge

Available from:

Install method:
Tasmota pre-installed

GPIO #Component
GPIO00 IRrecv
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 IRsend
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 None
GPIO14 None
GPIO15 None
GPIO16 None
GPIO17 None
{"NAME":"AT-IRBR-1.4","GPIO":[1088,0,0,0,1056,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18,"CMND":"Module 0"}
This device comes with Tasmota already installed!

With over 10 Meters range, the IR Bridge allows you to control almost any infrared device and is compatible with Tasmota and ESPhome. If you are feeling ambitious then you can even use the IRremoteESP8266 Library with Arduino!

With the 38kHz IR Receiver you can configure Tasmota to relay IR signals via WiFi and repeat IR signals in a different room using a 2nd IR Bridge.

The device can be easily integrated into home automation solutions such as Home Assistant. You can even place the device behind your TV and it should still be able to control it.

The best part is that as you decide what Firmware to install on it there is no need for another Mobile App or a Cloud Subscription.

Things you will need to provide:

  • 5V/1A Power Supply via Micro USB.

Wholesale Orders or Custom Builds
Please contact Automate Things UK if you need to order a quantity of units, or need something custom.