BAZZ 10 ft RGBW LED Strip (U183MRGBWWF)
Available from:
Amazon.com
Manufacturer:
Bazzsmarthome.ca
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | Button 1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM 1 |
| GPIO05 | PWM 4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM 2 |
| GPIO13 | None |
| GPIO14 | PWM 3 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"BAZZ U183MRGBWWF RGBW LED Strip","GPIO":[32,0,0,0,416,419,0,0,417,0,418,0,0,0],"FLAG":0,"BASE":18}The controller is very easy to open and it is quite simple to solder the necessary wires to program this device using a serial adaptor. The button is connected to GPIO0 so simply press the button while powering up the controller to put it in programming mode.