BAZZ 4" Recessed Downlight (WFDISK400W)
Available from:
Bazzsmarthome.ca
Manufacturer:
Bazzsmarthome.ca
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM 5 |
| GPIO05 | PWM 4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM 1 |
| GPIO13 | PWM 2 |
| GPIO14 | PWM 3 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"WFDISK400W","GPIO":[0,0,0,0,420,419,0,0,416,417,418,0,0,0],"FLAG":0,"BASE":18}The controller is a TYWE2S to open the led recessed light only four phillips screws are used you will need to unsolder the controller from the board inside the LED unit with a hot air soldering iron. I have heated under the board until le module became free there is around 6 solder point under the controller.
Pinout
.