Bestten LO-2-W
Wall Outlet
Available from:
Amazon.com
Amazon.ca
Flashed with:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | LedLinki |
| GPIO05 | Button1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Template
{"NAME":"BESTTEN LO-2-W","GPIO":[0,0,0,0,158,17,0,0,21,0,0,0,0],"FLAG":0,"BASE":18}Alternative Template
{"NAME":"BESTTEN LO-2-W","GPIO":[17,0,0,0,57,0,0,0,21,56,0,0,0],"FLAG":0,"BASE":1}Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.
From newly received units ordered on amazon.ca.
- Button was not on the same GPIO as in the previous entry in the database.
- GPIO13 had not effect on led. The led seems to toggle with relay whatever the config.
- Changed GPIO4 to LedLinki (personal preference)