{"NAME":"BW-SHP10 PM","GPIO":[0,148,0,207,158,21,0,0,0,17,0,0,0],"FLAG":0,"BASE":18}

For more accurate energy consumption measurements this device requires power monitoring calibration.

Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published (2020-06-08).

You need Tasmota 8.3.1.3+ to support the new power metering chip.

This template is only for SHP10 WITH POWER METERING. Non-power metering version looks identical and is sold under same model number. Check the barcode on the box: POA6204581 is the non-power monitoring version, while POA6204582 is the power monitoring version.