BlitzWolf SHP6 15A Power Monitoring Plug (BW-SHP6)
Available from:
Banggood.com
Aliexpress.com
Manufacturer:
Blitzwolf.com
Install method:
Tuya-Convert
GPIO # | Component |
---|---|
GPIO00 | Led1i |
GPIO01 | User |
GPIO02 | LedLinki |
GPIO03 | User |
GPIO04 | HLWBL CF1 |
GPIO05 | BL0937 CF |
GPIO09 | None |
GPIO10 | None |
GPIO12 | HLWBL SELi |
GPIO13 | Button1 |
GPIO14 | None |
GPIO15 | Relay1 |
GPIO16 | None |
FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"BlitzWolf SHP6","GPIO":[56,255,158,255,132,134,0,0,131,17,0,21,0],"FLAG":0,"BASE":45}
For more accurate energy consumption measurements this device requires power monitoring calibration.
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-01-09).
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-01-09).
This template is only for SHP6 15A version. The old 10A template is here.
If you prefer the red LED to represent “Power ON”, swap Led1i and LedLinki in the Configure Template page.
Serial Flash Instructions
Complete guide on Tasmota Docs