BrilliantSmart Jupiter Dimmer Module (20693/05)
Available from:
Pbtech.co.nz
Manufacturer:
Brilliantsmart.com.au
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | Tuya Tx |
| GPIO02 | None |
| GPIO03 | Tuya Rx |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"BrSm Jupiter","GPIO":[0,107,0,108,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":54}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-07-01).
Tuya-Convert might not be possible for this device since the template was added (2020-07-01).
Switch works with TuyaMCU device type.
DpId 2 is the dimmer so set TuyaMCU 21,2
DpId 105 is the sleep timer
DimmerRange 1000,300 worked to get max bright and dim. Dim to 0 turns it off. Also works with a 433MHz kinetic switch.