Logo
Briloner 2256-150 RGB LED Strip
EU
Briloner 2256-150 RGB

Available from:
Onlinebaufuchs.de




Manufacturer:
Briloner.com

Flashed with:
Tuya-Convert

GPIO #Component
GPIO00 IRrecv
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 PWM1
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 PWM2
GPIO13 None
GPIO14 PWM3
GPIO15 None
GPIO16 None
FLAG None

Template

{"NAME":"Briloner2256-1","GPIO":[51,0,0,0,37,0,0,0,38,0,39,0,0],"FLAG":0,"BASE":18}

Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published (2019-12-26).

Rule1
ON IrReceived#Data=0x00F7C03F DO Power 1 ENDON
ON IrReceived#Data=0x00F740BF DO Power 0 ENDON
ON IrReceived#Data=0x00F700FF DO Dimmer + ENDON
ON IrReceived#Data=0x00F7807F DO Dimmer - ENDON
ON IrReceived#Data=0x00F720DF DO Color2 1 ENDON
ON IrReceived#Data=0x00F7A05F DO Color2 2 ENDON
ON IrReceived#Data=0x00F7609F DO Color2 3 ENDON
ON IrReceived#Data=0x00F7E01F DO Color2 12 ENDON
Rule1 1
Rule2
ON IrReceived#Data=0x00F710EF DO color2 #FF3F00 ENDON
ON IrReceived#Data=0x00F730CF DO color2 #FF7E00 ENDON
ON IrReceived#Data=0x00F708F7 DO color2 #FFBD00 ENDON
ON IrReceived#Data=0x00F728D7 DO color2 #FFFF00 ENDON
ON IrReceived#Data=0x00F7906F DO color2 #00FF3F ENDON
ON IrReceived#Data=0x00F7B04F DO color2 #00FF7E ENDON
ON IrReceived#Data=0x00F78877 DO color2 #00FFBD ENDON
ON IrReceived#Data=0x00F7A857 DO color2 #00FFFF ENDON
ON IrReceived#Data=0x00F750AF DO color2 #3F00FF ENDON
Rule2 1
Rule3
ON IrReceived#Data=0x00F7708F DO color2 #7E00FF ENDON
ON IrReceived#Data=0x00F748B7 DO color2 #BD00FF ENDON
ON IrReceived#Data=0x00F76897 DO color2 #FF00FF ENDON
ON IrReceived#Data=0x00F7D02F DO backlog speed 1;Scheme 4 ENDON
ON IrReceived#Data=0x00F7F00F DO backlog speed 5;Scheme 2 ENDON
ON IrReceived#Data=0x00F7C837 DO Fade Toggle ENDON
ON IrReceived#Data=0x00F7E817 DO backlog Fade 0;BlinkTime 1;BlinkCount 2;Power 3;RuleTimer1 60 ENDON
ON Rules#Timer=1 do backlog Fade 1;Power 0 ENDON
Rule3 1

The Smooth button on the remote is used as a switchoff timer of 60 seconds. The Fade button toggles fading between colors on and off Be sure to use a recent firmware. In 7.1 the IrRecv (51) was not available until upgraded to 8.1