Logo
cod.m WLAN Pixel Controller v0.8 RGBIC LED (90060)
GLOBAL
cod.m WLAN Pixel Controller v0.8

Available from:
Shop.codm.de





Manufacturer:
Codm.de

Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 None
GPIO05 LedLink
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 None
GPIO14 None
GPIO15 Button 1
GPIO16 WS2812 1
GPIO17 None
GPIO18 None
GPIO19 None
GPIO20 None
GPIO21 None
GPIO22 None
GPIO23 None
GPIO24 None
GPIO25 None
GPIO26 None
GPIO27 None
GPIO6 None
GPIO7 None
GPIO8 None
GPIO11 None
GPIO32 None
GPIO33 None
GPIO34 None
GPIO35 None
GPIO36 None
GPIO37 None
GPIO38 None
GPIO39 None
Configuration for ESP32
Edit on GitHub
{"NAME":"cod.m Pixel Controller V0.8","GPIO":[0,0,0,0,0,544,0,0,0,0,0,32,1376,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}

Serial Flashing

Connect to marked pins, press flash button during boot.

WLED

Device comes with current WLED binary already installed on the device (you can choose LED strip firmware type)

Template for v0.6 (ESP8266)

{"NAME":"cod.m Pixel Controller V0.6","GPIO":[32,0,1376,0,0,0,0,0,544,0,0,0,0,0],"FLAG":0,"BASE":18}

Template for v0.4 (ESP8266)

{"NAME":"cod.m Pixel Controller V0.4","GPIO":[32,0,0,1376,0,0,0,0,544,1,0,0,0,0],"FLAG":0,"BASE":18}