Logo
Connect SmartHome 10W RGBW Bulb
B22
Model reference: CSH-B22RGB10W
Connect SmartHome 10W

Available from:
Harveynorman.com.au
Laserco.com.au



Manufacturer:
Connectsmarthome.com.au

Flashed with:
Tuya-Convert

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 PWM1
GPIO05 PWM4
GPIO09 None
GPIO10 None
GPIO12 PWM2
GPIO13 PWM5
GPIO14 PWM3
GPIO15 None
GPIO16 None
FLAG None

Template

{"NAME":"CSH-B22RGB10W","GPIO":[0,0,0,0,37,40,0,0,38,41,39,0,0],"FLAG":0,"BASE":18}

Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.

User’s guide: https://www.connectsmarthome.com.au/guides/lights/CSH%20User%20Manual%20-%20E27%20B22.pdf

The photographs on the manufacturer website show 900 lumens, but in store the boxes say 1000 lumens.