Connect SmartHome 10W RGBW Bulb (CSH-E27RGB10W)
Available from:
Harveynorman.com.au
Laserco.com.au
Manufacturer:
Connectsmarthome.com.au
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM1 |
| GPIO05 | PWM4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM2 |
| GPIO13 | PWM5 |
| GPIO14 | PWM3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"CSH-E27RGB10W","GPIO":[0,0,0,0,37,40,0,0,38,41,39,0,0],"FLAG":0,"BASE":18}
See Tasmota documentation on how to configure RGBW lights to your needs.
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-07-31).
User’s guide: https://www.connectsmarthome.com.au/guides/lights/CSH%20User%20Manual%20-%20E27%20B22.pdf
The photographs on the manufacturer website show 900 lumens, but in store the boxes say 1000 lumens.