Connect SmartHome 5W CCT Bulb (CSH-GU10WW5W)
Available from:
Harveynorman.com.au
Manufacturer:
Connectsmarthome.com.au
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM1 |
| GPIO05 | PWM2 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Connect CSH-GU10WW5W","GPIO":[0,0,0,0,37,38,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-11-04).
Tuya-Convert might not be possible for this device since the template was added (2020-11-04).
You’ll need to enter ‘LedTable 0’ in console to enable proper control of brightness - without this, dimming below 100% leads to very low light output.