D3D Smart Plug with USB & Power Monitor Power Monitoring Plug (FLHS-ZN04)
Available from:
D3dsecurity.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led2i |
| GPIO01 | User |
| GPIO02 | Led1i |
| GPIO03 | HLWBL SELi |
| GPIO04 | User |
| GPIO05 | HLW8012 CF |
| GPIO09 | User |
| GPIO10 | User |
| GPIO12 | User |
| GPIO13 | Button1 |
| GPIO14 | HLWBL CF1 |
| GPIO15 | Relay1 |
| GPIO16 | User |
| FLAG | User |
Configuration (old format, will be converted to new template when applied)
{"NAME":"D3D FLHS-ZN04","GPIO":[57,255,56,131,255,133,255,255,255,17,132,21,255],"FLAG":15,"BASE":18}
For more accurate energy consumption measurements this device requires power monitoring calibration.
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-07-16).
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-07-16).
USB is Directly Powered & always ON, Not connected to relay.