Deltaco 13A IP44 Power Monitoring Outdoor Plug (SH-OP01)
Available from:
Amazon.de
Idealo.de
Clasohlson.com
Manufacturer:
Deltaco.no
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button 1 |
| GPIO04 | BL0937 CF |
| GPIO05 | HLWBL CF1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | HLWBL SELi |
| GPIO13 | Led_i 1 |
| GPIO14 | Relay 1 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"Deltaco SH-OP01","GPIO":[0,0,0,32,2720,2656,0,0,2624,320,224,0,0,0],"FLAG":0,"BASE":55}
For more accurate energy consumption measurements this device requires power monitoring calibration.
This device uses WB2S module which needs to be replaced with ESP-02S, WT-01N or WT32C3-01N. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.
This device uses WB2S module which needs to be replaced with ESP-02S, WT-01N or WT32C3-01N. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.
Newer models comes with WB2S modules, needs replacement. Exact same steps as https://medium.com/@peter.feerick/converting-a-medion-life-smart-plug-to-tasmota-dff741bfc35e