Deta 2 Gang Switch (6912HA)
Available from:
Bunnings.com.au
Bunnings.co.nz
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | LedLink |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Button2n |
| GPIO13 | Relay1 |
| GPIO14 | Relay2 |
| GPIO15 | None |
| GPIO16 | Button1n |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"DETA 2G Switch","GPIO":[0,0,0,0,157,0,0,0,91,21,22,0,90],"FLAG":0,"BASE":18}This device now comes with a Wi-Fi module incompatible with Tasmota
October 2021 - Updated product uses WB3S module. Packaging has a model number of 6912HA - Series 2.
To enable standard (factory) functionality of the Status LED (displaying Wi-Fi Connection Status) add this Rule: `Rule1 on system#boot do Backlog LedPower 1; LedState 0; LedPower 1; LedState 8; endon’
This rule enables the status LED when its connected to Wi-Fi, without this rule the default behaviour will result in the Status LED switching on & off every time the Relay is activated.