{"NAME":"Duux DXCF12","GPIO":[0,0,0,0,0,0,0,0,0,2304,0,2272,0,0],"FLAG":0,"BASE":54,"CMND":"TuyaMCU 61,2 | TuyaMCU 62,3 | TuyaMCU 12,4 | TuyaMCU 13,5 | TuyaMCU 64,6"}

WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2022-05-25).

MCU Functions

• dpid1 Power relay - When toggled will turn fan on / off.
• dpid2 Mode - 0 = Manual Mode, 1 = Natural Mode, 2 = Sleep Mode
  • Natural Mode: The fan speed varies randomly between (speed 3 to 6), in - the interval of every 15 seconds, giving the effect of a natural breeze.
  • Sleep Mode: The fan will operate at speed setting 1
  • Manual Mode: Fan speed is set by dpid3
• dpid3 Sets the fan speed: 0 slow - 25 fast, (display 1 - 26)
• dpid4 Oscillates horizontally
• dpid5 Oscillates vertically
• dpid6 Set an automatic timer: 0 - 12 h

Configure Tasmota’s DpIds with the correct FnIds:

Backlog TuyaMCU 61,2; TuyaMCU 62,3; TuyaMCU 12,4; TuyaMCU 13,5; TuyaMCU 64,6;

Configure the correct Enums lists for Speed, Mode and Timer:

Backlog TuyaEnumlist 1,2; TuyaEnumlist 2,25; TuyaEnumlist 4,12;