Edisio 10A Plug (82935652)
Edisio 10A

Available from:

Install method:
USB to Serial

GPIO #Component
GPIO00 User
GPIO01 User
GPIO02 User
GPIO03 User
GPIO04 User
GPIO05 User
GPIO09 User
GPIO10 User
GPIO12 User
GPIO13 User
GPIO14 Button 1
GPIO15 User
GPIO16 Led_i 1
GPIO17 User
GPIO18 User
GPIO19 User
GPIO20 User
GPIO21 User
GPIO22 User
GPIO23 User
GPIO24 User
GPIO25 User
GPIO26 Relay 1
GPIO27 User
GPIO6 User
GPIO7 User
GPIO8 User
GPIO11 User
GPIO32 User
GPIO33 User
GPIO34 User
GPIO35 User
GPIO36 User
GPIO37 User
GPIO38 User
GPIO39 User
Configuration for ESP32
{"NAME":"Edisio Wifi Timer","GPIO":[1,1,1,1,1,1,1,1,1,1,32,1,320,1,1,1,1,1,1,1,1,1,224,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":1}

The device open with 2 triangle screw behind, and simply pry off using plastic spudger to get the top off. The ESP32-S2 chip is on a little board at the bottom right. The 5 pin (vdd, gnd, rx, tx, GPIO0) are accessible without desoldering this board