Electrodragon ESP32-C3-WROOM LED Controller (NWI1124)
Available from:
Electrodragon.com
Manufacturer:
W2.electrodragon.com
Install method:
onboard usb
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM 4 |
| GPIO05 | PWM 3 |
| GPIO06 | PWM 2 |
| GPIO07 | PWM 1 |
| GPIO08 | None |
| GPIO09 | Button 1 |
| GPIO10 | LedLink |
| GPIO12 | None |
| GPIO13 | None |
| GPIO18 | None |
| GPIO19 | None |
| GPIO20 | None |
| GPIO21 | None |
Configuration for ESP32-C3
{"NAME":"ESP32-C3-WROOM-2 NWI1126","GPIO":[0,0,0,0,419,418,417,416,0,32,544,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}- Support one channel RGB LED strips (can also be used for three channels LED strips)
- Support one extra channel white LEd strips.
- Support one channel WS2812 LED strips or ring, (select by jumper, can not work with RGB in the same time)
- On board Mosfet control is FR1205, support up to 44A/55V, for low light 5050 white led strip is about 0.4A 12V(5W), so technically support up to 100 meter per channel.
- Power Supply by DCDC MP1584:
Input voltage 6-27V, also power LED strip If LED strip is 12V, input voltage should be 12V. For WS2812, input voltage should use 5V.
More info on the NWI1166-DAT board (https://w2.electrodragon.com/Board-dat/NWI/NWI1126-DAT/NWI1126-DAT.md “here”.
