Energizer A19 10W Multi-White CCT Bulb (EAW2-1001-MWT)
Available from:
Amazon.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | PWM1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | PWM2 |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Energizer CCT ","GPIO":[0,0,0,0,0,37,0,0,0,38,0,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2024-11-11).
Tuya-Convert might not be possible for this device since the template was added (2024-11-11).
Turn the bulb off and on every 1-2 seconds 5 or so times and it should start to flash/flicker. Then simply flash OTA using Tuya-Convert.
Confirmed Tuya-Convert works, as of 10/18/2024