Esooli 1 Gang Switch (SL-Wifi-01)
Available from:
Aliexpress.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | Led1 |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | Button1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Esooli 1G","GPIO":[0,52,0,0,0,17,0,0,21,0,0,0,0],"FLAG":0,"BASE":1}Appears to be the same as ZUCZUG 1 Gang.
To flash I needed to power up the device without GPIO0 low; put GPIO0 low then briefly put RST to low. Otherwise would not flash. Pads across the top to flash, looking left to right (with writing correct way up): 3V3, RX, TX, GPIO0, RST, GND