Etersky WF-CS01 Curtain Switch (WF-CS01)
Etersky WF-CS01

Available from:

Install method:
USB to Serial

GPIO #Component
GPIO00 LedLink
GPIO01 None
GPIO02 Led2
GPIO03 Button3
GPIO04 Relay3
GPIO05 Button2
GPIO09 None
GPIO10 None
GPIO12 Button1
GPIO13 Relay1
GPIO14 Led3
GPIO15 Relay2
GPIO16 Led1
Configuration (old format, will be converted to new template when applied)

This device now comes with a Wi-Fi module incompatible with Tasmota

Requires configuring shutter support.

The device is very similiar or maybe identical to WF-CS02. Check the site for help with configuration.

The blue LEDs can be switched off if TX/GPIO1 is set to 0 V. A workaround to do so quickly is to configure GPIO1 to LED4. See alternative template.